Candle care & safety

Enjoy every candle safely

Simple care helps your AuraBliss candle burn more cleanly, evenly and safely from the first light to the final burn.

Before every burn

Trim the wick to approximately 6 mm and remove any wick trimmings, matches or debris from the wax.

While it is burning

Keep the candle within sight on a stable, heat-resistant surface, away from draughts, children, pets and anything flammable.

After extinguishing

Make sure the flame is fully out and allow the candle and melted wax to cool completely before touching or moving them.

Three lit container candles beside lavender
Three AuraBliss floral soy candles in glass jars

The first burn matters

Help container candles burn evenly

On the first burn, allow the melt pool to develop gradually towards the edges of the container. Extinguishing a candle too soon can create a narrow memory ring and lead to tunnelling on later burns.

Never exceed the maximum burn time shown on the product or safety label. As a general AuraBliss rule, do not burn a candle for more than four hours at a time. Allow it to cool fully before trimming and relighting.

Jar candles

Keep the flame calm and centred

Trim the wick before each use. If the flame becomes unusually high, flickers continuously or produces visible smoke, extinguish the candle, allow it to cool and trim the wick before relighting.

Keep the wax pool free from debris. Do not move the jar while the wax is liquid, and stop using the candle before the flame reaches the base of the container.

Statement candles

Prepare for melting wax

Always place freestanding and sculptural candles on a large, stable, heat-resistant candle plate or holder with enough space to catch melted wax.

Keep them upright and well away from fabrics, shelves, decorations and other candles. Decorative shapes can burn differently, so remain nearby and extinguish the candle if the flame becomes unstable.

Wax bouquets

Remove every wax piece before use

Never light or heat a wax piece while it is still inside a bouquet or attached to wrapping, ribbon, dried flowers, wire or decorative material.

Use only pieces specifically intended to be burned as candles or used as wax melts. Remove the chosen piece completely and separate it from every decorative component.

Place candle pieces on a suitable heat-resistant candle holder. Use wax melt pieces only in an appropriate wax warmer and follow the warmer manufacturer's instructions.

AuraBliss sculptural heart, teddy bear and elephant candles

Burn beautifully, burn safely

Essential candle safety

Never leave a burning candle unattended.

Keep candles away from children and pets.

Keep a safe distance from curtains, paper, bedding and other flammable materials.

Avoid open windows, fans, vents and other draughts.

Do not touch or move a candle while the wax is liquid.

Never use water to extinguish a candle.

Do not burn a candle if its container is cracked or damaged.

Follow the instructions and warning label supplied with the product.

Candle care questions

Why should I trim the wick?
A wick of approximately 6 mm helps control the flame and can reduce smoking, soot, uneven burning and rapid wax consumption.
Why is my candle tunnelling?
Tunnelling can happen when a container candle is extinguished before the melt pool has had time to spread. A longer first burn, within the candle's safe maximum burn time, helps create a more even wax memory.
What should I do if the candle starts smoking?
Extinguish it safely and let it cool. Check that the wick is trimmed, the wax is clear of debris and the candle is away from draughts before relighting.
How should I extinguish a candle?
Use a candle snuffer where possible, or gently blow out the flame. Check that the wick is no longer glowing and never use water, which can cause hot wax to splash or damage the container.
How should I store my candle?
Store it upright in a cool, dry place away from direct sunlight and strong heat. Replace the lid when the candle is cool, if one is supplied, to help keep dust and debris away from the wax.